Name: Sonit Nooney
Grade: 6
Center: Ghatkopar (W)
City: Mumbai
Level in Eduprime Robotics course: 1
Components used: Slide switch, LED – Red, LED – Green, 3v Battery
Project details: Pedestrian crossing signal is used to guide pedestrians to cross the busy lane. When the pedestrian signal is green, all the vehicles will stop and allow pedestrians to cross the lane. The signal is controlled by a slide switch.
Name: Dharmil Gathani Grade: 9 Center: Mira Road City: Mumbai Level in Eduprime Robotics course: 1 Components used: DC Motor, Tact switch, 3V Battery Project details: Amidst the corona virus pandemic, Dharmil has designed this wheel to help all to look forward to cleanliness. The concept and working is simple. It gives you the suggestions…
Flapper is a fun project in Electronics, where the flaps on each side move frequently as we move the whole device (we would like to call it a Robot) forward. It is made using 2 DC Motors and 2 wheels. It has a free wheel in the front and it is controlled using a Remote….
Name: Chaitya Grade: 4 Center: Ghatkopar City: Mumbai Level in Eduprime Robotics course: 1 Project: Bank alarm system Project Details: We all have our valuables stored somewhere safely, preferably in banks. But are those valuables really safe? If you worry about it, then use Chaitya’s solution to protect your precious things. He designed a security…
Name: Vaidehi Grade: 8 Center: Ghatkopar City: Mumbai Level in Eduprime Robotics course: 1 Project: Air dispenser Project Details: When summer is on its peak and the fans fail to serve their purpose. At that moment, we need something better than fan. And what if that one thing is portable too? An air dispenser helps…
Name: Yuwan Grade: 2 Center: Cuffe parade City: Mumbai Level in Eduprime Robotics course: 2 Project Detail: Mixer was designed by Yuwan, who is 8 years old. The mixer had two driving motors at the rear and a motor in front attached to a blade. The blade could be used to mix cements in any…
Name: Shrey Grade: 2 Center: Cuffe parade City: Mumbai Level in Eduprime Robotics course: 1 Project: Electronic Rotating Dice Project details: Shrey walked in with his electronic rotating dice which could be a perfect substitute for the conventional dice. The numbers were printed on a circular board and the board was stationary. The motor had…